General information

The starting and ignition system, including starter motor, spark plugs, ignition coils and ignition modules, has been developed to the highest safety standards. These components are essential for safe starting and reliable operation of the engine.

They may only be used for the purpose for which they were designed and manufactured.

Any use outside the intended purpose or improper handling can impair the function of the starting and ignition system and endanger safety.

Improper modifications or use can cause damage to the engine, electronics or starter motor and may result in the person using the product being held liable for consequential damage.

DANGER

Before replacing components of the starting and ignition system, make sure that the replacement parts are suitable for the vehicle model in question. These parts are decisive for the function of the engine and the safety of the vehicle.

For safety reasons, all maintenance and repair work may only be carried out by trained specialists or under expert supervision, in accordance with the vehicle manufacturer's current specifications.

Improper fitting or the use of incorrect parts can lead to starting problems, engine failure or damage to the electronics.

Faulty installations can lead to malfunctions in the ignition system, which endangers the operational safety of the vehicle.

The manufacturer accepts no liability for damage or injury resulting from improperly fitted products.

MANDATORY

Disconnect the vehicle's power supply before working on the starting and ignition system to avoid short circuits or damage to the electronics.

Wear suitable safety gloves to avoid injuries from sharp edges or hot components.

Only use the parts and tools recommended by the vehicle manufacturer to ensure optimum function and safety.

Check all electrical connections and cables of the starting and ignition system for damage or corrosion and replace defective components.

Use spark plugs with the correct heat range and the correct electrode gap.

After fitting, check the vehicle's electrical system, if necessary with a suitable diagnostic device, to make sure that all systems work correctly.

After the repair or maintenance, carry out a test drive to ensure correct function.

Dispose of old parts and damaged components of the starting and ignition system in an environmentally friendly manner and in accordance with the applicable regulations.

Use hand protection	Use eye protection	Use hearing protection	Use protective clothing	Use foot protection