Rear wheel hub PCD 4x130 type A
€179.93
Available, delivery time: 1-3 days
Product information "Rear wheel hub PCD 4x130 type A"
| Make: | BOOM Trikes |
|---|---|
| Position: | left, right |
General information
Wheel bearings and wheel hubs are safety-relevant components that are decisive for the proper function of the chassis and the safety of the vehicle.
They may only be used for the purpose for which they were designed and manufactured.
Any use outside the intended purpose or any modification of the product can impair its function and endanger safety.
Improper modifications or use void the warranty and may result in the person using the product being held liable for damage to persons or property.
 | DANGER | |
Before replacing wheel bearings, make sure that the replacement part is suitable for the vehicle model in question.
This product plays a decisive role in vehicle safety and may only be fitted by qualified specialists in accordance with the vehicle manufacturer's current specifications.
Fitting requires special tools and sound expertise.
Improper fitting or incorrect handling can have serious consequences such as loss of control of the vehicle, accidents or considerable damage to property.
The manufacturer accepts no liability for damage or injury resulting from improperly fitted products.
 | MANDATORY | |
Only use the tools recommended by the vehicle manufacturer to avoid damage during fitting.
Fitting must take place in a clean environment to prevent dirt and contamination.
Only open the wheel bearing packaging immediately before fitting to protect the product from dirt and moisture.
Leave the anti-corrosion agent on the bearing – it is not a lubricant, but protects against corrosion during storage and fitting.
Do not clean the wheel bearing before fitting, as this can remove the protective layer and shorten the service life of the product.
Tighten all fasteners to the torque specified by the vehicle manufacturer.
After fitting, check the chassis and wheel alignment and have it readjusted if necessary.
Dispose of old parts in an environmentally friendly manner and in accordance with local regulations.
 |  |  |  |  |
| Use hand protection | Use eye protection | Use hearing protection | Use protective clothing | Use foot protection |
| Make: | BOOM Trikes |
|---|---|
| Position: | left, right |
BOOM Trikes is a registered trademark of trike.company SG VertriebsgmbH.
Pursuant to Section 2 (14a) of the German Product Safety Act (ProdSG), trike.company SG VertriebsgmbH is deemed to be the manufacturer of the product offered.
Contact
trike.company SG VertriebsgmbH
Schneider 1
88410 Bad Wurzach
www.trike.company
office@trike.company
Please also observe the product-specific safety information!
Login
Fits with this part
Diameter 280 mm, thickness 10 mm, bolt pattern 4x130. For BOOM trikes with a VW Beetle axle. Also suitable for Easy-Trikes. Price per piece. Brake discs should always be replaced as a set for each axle!