General information

This product has been developed to the highest safety standards and may only be used for the purpose for which it was designed and manufactured. Any use outside the intended purpose or improper handling can impair its function and endanger safety. Improper modifications or use void the warranty and may result in the person using the product being held liable for damage to persons or property.

DANGER

Before replacing brake system parts, make sure that the replacement parts are suitable for the vehicle model in question.

Brake system components are safety-critical parts of a vehicle. Improper fitting or the use of damaged or unsuitable brake components can lead to complete failure of the brake system, which seriously endangers vehicle safety.

For safety reasons and for optimum function, all maintenance and repair work may only be carried out by trained specialists in accordance with the vehicle manufacturer's current specifications.

Incorrect installation or wear of brake components can reduce braking force, lengthen the braking distance or lead to total brake failure. Damaged or worn parts can impair the stability and control of the vehicle and increase the risk of accidents.

The manufacturer accepts no liability for damage or injury resulting from improper fitting, maintenance or use.

MANDATORY

When cleaning parts, avoid inhaling dust by taking suitable protective measures.

Always wear suitable gloves when fitting and removing parts with sharp edges.

Tighten all fasteners to the torque specified by the vehicle manufacturer to ensure safe fitting.

Always replace brake pads and brake discs per axle to ensure even braking.

Keep your hands away from the brake pad seats when the caliper pistons are removed with compressed air, to avoid crushing.

After fitting, check the brake fluid and bleed the system if necessary to ensure reliable braking force.

Avoid direct contact with brake fluid, as it can irritate skin and eyes. In case of contact, rinse the affected areas thoroughly immediately in accordance with the instructions of the vehicle or brake fluid manufacturer.

Protect electrical parts from electrostatic charge and impacts to avoid damage to plastic parts.

Make sure that all electrical connections are correctly connected. Check that the warning lights work properly. Otherwise, failure of the warning lights can impair the function of the brake system or the brake warning.

Make sure that no lubricants or other substances come into contact with braking surfaces such as discs, drums, pads or shoes, as this can impair braking performance and cause serious accidents.

After fitting, test the brakes by braking carefully in a safe place.

Use hand protection	Use eye protection	Use hearing protection	Use protective clothing	Use foot protection