Skip to main content Skip to search Skip to main navigation
Free shipping from €150 in Germany · from €200 within the EU (excluding bulky goods) Shipped worldwide every day Over 20,000 parts in stock

PU bushings for Rewaco control arms RF1 / RF2 / RF3 / PUR3

Product information "PU bushings for Rewaco control arms RF1 / RF2 / RF3 / PUR3"

PU bushing set for rewaco RF1, RF2, RF3 and PUR3 up to February 2021, all motor variants. Not suitable for models with a Comfort frame.
Engine: Chery 1,1 l 51/58 kW, Chery 1,5 l 81 kW, Ford 1,6 l 55/80/85 kW, Ford 1,6 l 92/100 kW (VCT), Mitsubishi 1,5 l 81 kW, Mitsubishi 1,5 l 103 kW (Turbo), Mitsubishi 1,5 l 130 kW (Turbo), Peugeot 2,0 l 103 kW
Make: rewaco

General information

This product has been developed to the highest safety standards and may only be used for the purpose for which it was designed and manufactured. Any use outside the intended purpose or improper handling can impair its function and endanger safety. Improper modifications or use void the warranty and may result in the person using the product being held liable for damage to persons or property.

 

DANGER

 

Before replacing chassis parts, make sure that the replacement part is suitable for the vehicle model in question.

This product plays a decisive role in vehicle safety and may only be fitted by qualified specialists with sufficient experience and training in working with chassis components, in accordance with the vehicle manufacturer's current specifications.

Fitting requires special tools and sound expertise.

Improper or incorrect fitting – whether due to failure to follow these instructions or for other reasons – voids the warranty and may make the fitter liable for injury or damage to property.

The manufacturer accepts no liability for damage or injury resulting from improperly fitted products.

 

MANDATORY

 

Wear suitable gloves when fitting and removing suspension arms to avoid injuries from sharp edges.

Only use suitable tools to avoid damaging the part or adjacent components.

Check bolts and nuts before fitting. Replace self-locking nuts and bolts with new ones.

Make sure that all fastenings are tightened to the torque specified by the vehicle manufacturer.

After fitting, check the wheel alignment and have it adjusted if necessary.

Dispose of old parts in an environmentally friendly manner.

 

Use hand protectionUse eye protectionUse hearing protectionUse protective clothingUse foot protection
Engine: Chery 1,1 l 51/58 kW, Chery 1,5 l 81 kW, Ford 1,6 l 55/80/85 kW, Ford 1,6 l 92/100 kW (VCT), Mitsubishi 1,5 l 81 kW, Mitsubishi 1,5 l 103 kW (Turbo), Mitsubishi 1,5 l 130 kW (Turbo), Peugeot 2,0 l 103 kW
Make: rewaco

rewaco is a registered trademark of rewaco Spezialfahrzeuge GmbH.

Pursuant to Section 2 (14a) of the German Product Safety Act (ProdSG), rewaco Spezialfahrzeuge GmbH is deemed to be the manufacturer of the product offered.

Contact

rewaco Spezialfahrzeuge GmbH
Schlosserstraße 24
51789 Lindlar, Germany

www.rewaco.com
info-service@rewaco.de

Please also observe the product-specific safety information!

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.