General information

Engine parts such as cylinder heads, pistons, connecting rods, crankshafts, camshafts and gaskets have been developed to the highest safety standards.

These parts are essential for the function, performance and tightness of the engine and may only be used for the purpose for which they were designed and manufactured.

Any use outside the intended purpose or improper handling can impair the function of the engine and endanger safety.

Improper modifications or use can cause serious engine damage and may result in the person using the product being held liable for consequential damage.

DANGER

Before replacing engine parts or gaskets, make sure that the replacement parts are suitable for the vehicle model and engine in question.

These parts are decisive for the service life, performance and safety of the engine.

For safety reasons and for optimum function, all maintenance and repair work may only be carried out by trained specialists in accordance with the vehicle manufacturer's current specifications.

Improper fitting or the use of incorrect parts and gaskets can lead to engine damage, loss of power or leaks that can seriously impair the use of the vehicle.

Faulty installations can seriously impair the operational safety of the vehicle.

The manufacturer accepts no liability for damage or injury resulting from improperly fitted products.

MANDATORY

Work in a clean and well-lit environment to avoid damage from dirt or contamination.

Wear suitable safety gloves to avoid injuries from sharp edges or heavy parts.

Only use the tools, parts and sealing materials recommended by the vehicle manufacturer to ensure optimum function and service life of the engine.

Before fitting, check the fit and condition of the engine parts and gaskets. Replace damaged or worn parts.

Observe the tightening torques and fitting instructions specified by the vehicle manufacturer to avoid stresses or damage to the parts and gaskets.

Clean all sealing surfaces thoroughly and apply a suitable sealant if necessary to ensure an optimum seal.

Make sure that gaskets are correctly positioned and evenly tightened to avoid leaks.

After fitting, check the function of the engine with a test run and check all connections for leaks.

Dispose of old parts, used gaskets and operating fluids such as oil or coolant in an environmentally friendly manner and in accordance with the applicable regulations.

Use hand protection	Use eye protection	Use hearing protection	Use protective clothing	Use foot protection