Belt tensioner for the V-ribbed belt on BOOM Trikes Low Rider Muscle and Mustang with Ford 1.6 litre engine.

The BSI (Boîtier de Servitude Intelligent) is a central control unit in the BOOM Trikes automatic models with Peugeot engine. The BSI works closely with other control units in the vehicle, such as the engine control unit and transmission control unit. It is a special development that is only installed in BOOM trikes.Two generations of the BSI were installed in the Peugeot 2.0 engines.Generation 1 (gold or black)The first generation is a gold or black anodised aluminium housing with two plugs on the top and one on the side. This version is no longer available. It is replaced by generation 2 of the BOOM BSI. This is a kit consisting of the BSI board, the housing and connectors with pins for conversion. In addition, the engine control unit (ECU) must be sent in for reprogramming. Generation 2 (silver) The second generation is a stainless steel housing with two connectors on the side. This is the latest version and only the circuit board in the housing needs to be replaced.

The BSI (Boîtier de Servitude Intelligent) is a central control unit in the BOOM Trikes automatic models with Peugeot engine. The BSI works closely with other control units in the vehicle, such as the engine control unit and transmission control unit. It is a special development that is only installed in BOOM trikes.As the housing of the BSI can be screwed together and reused, the scope of delivery consists of the programmed circuit board for replacement

Complete cylinder head for BOOM trikes and rewaco with Chery 1.5 engine. Engine code letter SQR477F

For BOOM and rewaco models with Chery 1.5 engine.

Crankshaft sensor for Mitsubishi 1.5 models from BOOM and rewaco

For BOOM and rewaco models with Mitsubishi 1.5 engine

Complete cylinder head for BOOM trikes and rewaco with 1.5 litre Mitsubishi turbo engines. Engine code letter 4A91T.

Complete cylinder head for BOOM trikes and rewaco with 1.5 litre Mitsubishi turbo engines. Engine code letter 4A91.

For models with Chery 1.5 engine. 8 pieces are required.

Distributor cap with EMC cover in black for BOOM Trikes Classic with injection engine 1600i / ACD.

Engine control unit for BOOM Mustang trikes with Ford 1.6 engine (80kW/92kW).Please note that trijekt is purely the manufacturer of the hardware.The special control software and the data records have been created proprietarily for BOOM and trijekt has no access to them.trijekt has no access to this data.This control unit is specially programmed for each order! The chassis number of the vehicle is mandatory.

Engine control unit for BOOM trikes with Chery 1.5 engines.

Engine control unit for BOOM and rewaco models with Mitsubishi 1.5l engine 81 kW naturally aspirated engine. Please note that there are 4 different variants!Orientation guide for the emission standards:Euro 3 first registration from 1 Jan. 2007 (Bosch ME17)Euro 4 first registration from 1 Jan. 2017 (Bosch ME17) Euro 5 first registration from 1 Jan. 2021 (Bosch ME7)Euro 5+ first registration from 1 Jan. 2025 (Bosch ME7)

Engine control unit for BOOM and rewaco models with Mitsubishi 1.5l engine 103 kW turbo engine. Please note that there are 4 different variants!Orientation guide for the emission standards:Euro 3 first registration from 1 Jan. 2007 (Bosch ME7)Euro 4 first registration from 1 Jan. 2017 (Bosch ME7) Euro 5 first registration from 1 Jan. 2021 (Bosch M7)Euro 5+ first registration from 1 Jan. 2025 (Bosch ME7)

For BOOM Trikes Mustang 1.6 Peugeot automatic. Please note that the control units are extremely sensitive to undervoltage. Especially after the winter break, it is essential to charge the battery first, and always remember: switch on the ignition, wait 2 seconds (just wait until the petrol pump stops whirring) and only then press the starter button!

Engine control unit for rewaco RF1 GT / ST / LT 2 or 3 with Ford 1.6 engine (80kW/92kW).Please note that trijekt is purely the manufacturer of the hardware.The special control software and the data records are proprietary to rewaco and trijekt has no access to them.trijekt has no access to this data.This control unit is specially programmed for each order! The chassis number of the vehicle is mandatory.

Complete engine gasket set (see pictures) for Chery 1.5 litre engine from BOOM and rewaco.

Flywheel for BOOM trikes Mustang and rewaco with Chery 1.5 engine.Attention! Does not fit BOOM Trikes Low Rider Retro with Chery 1.5 engine. Please order 1907510 for this

Flywheel for the Low Rider Retro with Chery 1.5 engine. The sprocket is pinned 3 times, please note that one of the three dowel pins is offset by 2°, so the sprocket only fits in one position!

Fuselage engine Ford, code letter FYJA. Used on BOOM Trikes Low Rider Muscle and Mustang Ford and rewaco RF1.

For models with Chery 1.5 engine.

For BOOM Trikes Classic models with VW 1.6 litre engine ACD (1600i).

Ignition cable set in black for BOOM Trikes Classic with injection engine 1600i / ACD.